-->

Front transfer seal

What were your warranty claims and recall information

Front transfer seal

Postby Chrisp on Fri Jul 11, 2014 9:14 am

I had my front transfer case seal replaced on warranty after 60000 km. The pain is it has to be done at Toyota dealership, which is 300km away! So have to drive 300km there and wait for them to change the seal then drive home again. Pain!
User avatar
Chrisp
 
Posts: 681
Joined: Fri Jun 13, 2014 12:30 pm
Location: Onslow, WA


 

Re: Front transfer seal

Postby Donk on Fri Jul 11, 2014 12:06 pm

Might be worth your drive. Ive had a quick glance at mine and it looks like a split the case job as I couldnt see a retaining nut. Ed also has to do his to he is the test piolet :lol:

Unlucky bout no toyotas around I reckon I could find 15 dealer ships in that distance
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby Donk on Fri Jul 11, 2014 12:07 pm

Might be worth your drive. Ive had a quick glance at mine and it looks like a split the case job as I couldnt see a retaining nut. Ed also has to do his to he is the test piolet :lol:

Unlucky bout no toyotas around I reckon I could find 15 dealer ships in that distance
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby 09splitta on Fri Jul 11, 2014 1:50 pm

I replaced mine a few months ago, have to split the transfer case, wasn't to bad tho, Toyota wanted 48$ for the seal! Got same size at bearing shop for 4$
User avatar
09splitta
 
Posts: 73
Joined: Mon Sep 09, 2013 8:46 pm

Re: Front transfer seal

Postby Donk on Sat Jul 12, 2014 12:29 pm

Much involved in splitting a case?
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby VDJ ED on Sat Jul 12, 2014 12:43 pm

Checking now on the manual donk.
"You mean that shorter stick isnt to hold your handbag?"
User avatar
VDJ ED
 
Posts: 689
Joined: Thu Nov 07, 2013 5:55 pm
Location: Blacktown, nsw

Re: Front transfer seal

Postby Donk on Sat Jul 12, 2014 1:39 pm

I assume not but will be good to know
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby Boxhead55 on Sat Jul 12, 2014 2:47 pm

Image
User avatar
Boxhead55
 
Posts: 165
Joined: Sat Sep 14, 2013 3:31 pm

Re: Front transfer seal

Postby VDJ ED on Sat Jul 12, 2014 4:44 pm

cheers boxhead,

i got the procedure off the manual, will load a bunch of pics up. But will also try to upload a PDF document and i need people to tell me if it works so i can save heaps of time :)

https://drive.google.com/file/d/0BxH8JK ... sp=sharing
that link should direct you to the pdf document. **YOU WILL NEED A PDF READER*** ie adobe pdf reader (should be standard on every computer, for those that arnt tech savvy ;) )

Image
Image
Image
Image
Image
"You mean that shorter stick isnt to hold your handbag?"
User avatar
VDJ ED
 
Posts: 689
Joined: Thu Nov 07, 2013 5:55 pm
Location: Blacktown, nsw

Re: Front transfer seal

Postby VDJ ED on Sat Jul 12, 2014 4:47 pm

oh side note...

according to toyodiy.. the part numbers on the transfer assembly from a 1vd cruiser is the same as the fzj 90-98 model petrol cruiser, according to toyodiy who gets them from toyota.
"You mean that shorter stick isnt to hold your handbag?"
User avatar
VDJ ED
 
Posts: 689
Joined: Thu Nov 07, 2013 5:55 pm
Location: Blacktown, nsw

Re: Front transfer seal

Postby Donk on Sat Jul 12, 2014 11:07 pm

Cheers ed and boxhead. So its only a matter of removing the front hub off the transfer?
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby Boxhead55 on Sun Jul 13, 2014 4:42 am

Yep you will need a press as well
User avatar
Boxhead55
 
Posts: 165
Joined: Sat Sep 14, 2013 3:31 pm

Re: Front transfer seal

Postby Donk on Sun Jul 13, 2014 8:22 am

To easy cheers
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby VDJ ED on Sun Jul 13, 2014 8:54 am

Anyone click on the link? Need to know if it works and you can read the pdf
"You mean that shorter stick isnt to hold your handbag?"
User avatar
VDJ ED
 
Posts: 689
Joined: Thu Nov 07, 2013 5:55 pm
Location: Blacktown, nsw

Re: Front transfer seal

Postby fraz on Sun Jul 13, 2014 9:04 am

Can read the pdf on my phone, so no dramas there
2010 76 GXL - 2" Ultimate Suspension, ARB deluxe bar, winch, Toyo 265/75R16 AT's, Chip-It running on Tune 2 and DEA 3" Exhaust

See the Build up of my 2010 76 Series Landcruiser Here
fraz
 
Posts: 379
Joined: Mon Apr 14, 2014 7:06 am
Location: Eastern Suburbs, Sydney Australia

Re: Front transfer seal

Postby kyle300exc on Sun Jul 13, 2014 9:37 am

Yes works on my lap top as well. :shock:
2013 LC DC ,GVM upgrade lift kit, 285 BFG muddies, ARB bar, Warn Winch, Outback Console GME4500, 120lt Aux fuel tank, 90lt water tank, Ultimate coil over rear shocks, Tracklander rack, Aurora 40" light bar, led rock lights
User avatar
kyle300exc
Moderator
 
Posts: 2742
Joined: Mon Aug 05, 2013 1:38 pm
Location: South West Sydney

Re: Front transfer seal

Postby Donk on Sun Jul 13, 2014 9:59 am

Yerp works for me. Its probly far from failing but probly wont hurt to change the bearing out whilst at it
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area

Re: Front transfer seal

Postby VDJ ED on Sun Jul 13, 2014 10:44 am

Woo cheerin cheers fellas. Will make posting things from the workshop manual a lot easier :)

Yea same donk, I'll be ordering a seal and bearing when I do mine. It's out might as well change it.
"You mean that shorter stick isnt to hold your handbag?"
User avatar
VDJ ED
 
Posts: 689
Joined: Thu Nov 07, 2013 5:55 pm
Location: Blacktown, nsw

Re: Front transfer seal

Postby Donk on Tue Jun 21, 2016 4:09 pm

Familiar sight again :roll: :roll:
Image
2010 79 Workmate Ultimate 2" lift, 285/75r16 Mickey T ATZ 4 ribs, speedy territory alloys 16x7.5, ARB bar work, Ctek dual battery setup, onboard ARB compressor, Lightforce 240 HID XGT's, Fuel manager, Safari snorkel head
User avatar
Donk
Moderator
 
Posts: 3385
Joined: Mon Jul 22, 2013 4:47 am
Location: Cessnock area


Return to Warranty/Recalls

Who is online

Users browsing this forum: No registered users and 0 guests

cron