Front transfer seal

[Chrisp]

I had my front transfer case seal replaced on warranty after 60000 km. The pain is it has to be done at Toyota dealership, which is 300km away! So have to drive 300km there and wait for them to change the seal then drive home again. Pain!

[Donk]

Might be worth your drive. Ive had a quick glance at mine and it looks like a split the case job as I couldnt see a retaining nut. Ed also has to do his to he is the test piolet

Unlucky bout no toyotas around I reckon I could find 15 dealer ships in that distance

[Donk]

Might be worth your drive. Ive had a quick glance at mine and it looks like a split the case job as I couldnt see a retaining nut. Ed also has to do his to he is the test piolet

Unlucky bout no toyotas around I reckon I could find 15 dealer ships in that distance

[09splitta]

I replaced mine a few months ago, have to split the transfer case, wasn't to bad tho, Toyota wanted 48$ for the seal! Got same size at bearing shop for 4$

[Donk]

Much involved in splitting a case?

[VDJ ED]

Checking now on the manual donk.

[Donk]

I assume not but will be good to know

[Boxhead55]

[VDJ ED]

cheers boxhead,

i got the procedure off the manual, will load a bunch of pics up. But will also try to upload a PDF document and i need people to tell me if it works so i can save heaps of time

https://drive.google.com/file/d/0BxH8JK ... sp=sharing
that link should direct you to the pdf document. **YOU WILL NEED A PDF READER*** ie adobe pdf reader (should be standard on every computer, for those that arnt tech savvy )

[VDJ ED]

oh side note...

according to toyodiy.. the part numbers on the transfer assembly from a 1vd cruiser is the same as the fzj 90-98 model petrol cruiser, according to toyodiy who gets them from toyota.

[Donk]

Cheers ed and boxhead. So its only a matter of removing the front hub off the transfer?

[Boxhead55]

Yep you will need a press as well

[Donk]

To easy cheers

[VDJ ED]

Anyone click on the link? Need to know if it works and you can read the pdf

[fraz]

Can read the pdf on my phone, so no dramas there

[kyle300exc]

Yes works on my lap top as well.

[Donk]

Yerp works for me. Its probly far from failing but probly wont hurt to change the bearing out whilst at it

[VDJ ED]

Woo cheerin cheers fellas. Will make posting things from the workshop manual a lot easier

Yea same donk, I'll be ordering a seal and bearing when I do mine. It's out might as well change it.

[Donk]

Familiar sight again