Page 1 of 1

NZMarkb's Build

PostPosted: Tue Jan 07, 2020 5:41 am
by NZMarkb
Image

Hi Guys and Girls
Well sold my Hilux and time to start a new build project
Here's the starting point 2013 VX Ltd with 114,000km on the clock
Plans to start with are :

Exhaust (want to hear that V8 if i'm paying for the diesel)
Rear Draws
3rd battery in the back (already run the cable asn have a dc/dc charger from my Hilux)
Fit UHF I kept out of the Hilux - Not sure on antenna location yet
OME 50mm lift to the front and 20mm to the rear
MT tyres
Bull bar & wintch
Rear bar?
Underbody protection
Steel Roof rack

Will try and keep this up to date as I regret not documenting the Hilux build

Cheers
Mark

Re: NZMarkb's Build

PostPosted: Wed Jan 08, 2020 6:48 am
by NZMarkb
Don't know what's going on with photobucket :evil:

Re: NZMarkb's Build

PostPosted: Sun Jan 12, 2020 8:40 am
by NZMarkb
Took to it yesterday with a hole saw and fitted the snorkel
There nothing quite like cutting a great hole in your new pride and joy :lol: :lol: :lol:
Image

Re: NZMarkb's Build

PostPosted: Tue Jan 14, 2020 12:14 pm
by NZMarkb
Old Man Emu 50mm front and 20mm rear lift fitted today
Feels good so far, stiffer front springs in the front to allow for bullbar and winch that’s coming

Re: NZMarkb's Build

PostPosted: Wed Jan 22, 2020 1:35 am
by NZMarkb
NZMarkb wrote:Old Man Emu 50mm front and 20mm rear lift fitted today
Feels good so far, stiffer front springs in the front to allow for bullbar and winch that’s coming
33's fitted to ome rims for nowImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Wed Jan 22, 2020 1:42 am
by NZMarkb
NZMarkb wrote:Old Man Emu 50mm front and 20mm rear lift fitted today
Feels good so far, stiffer front springs in the front to allow for bullbar and winch that’s coming
Photos addedImageImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Sat Feb 22, 2020 2:49 pm
by NZMarkb
Got the draws mounted the other night
Just added a voltage meter ImageImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Sat Feb 22, 2020 5:11 pm
by NZMarkb
Fitted 3” exhaust
Not very loud, might have to do a muffler delete ;)

Re: NZMarkb's Build

PostPosted: Sat Feb 29, 2020 4:27 pm
by NZMarkb
Picked up the new wheels today
Hopefully will get them fitted this week Image

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Mon Mar 02, 2020 11:35 am
by NZMarkb
New wheels fitted Image

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Thu Mar 12, 2020 9:25 am
by NZMarkb
Factory rack removed ready for steel flat rackImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Thu Mar 12, 2020 12:05 pm
by NZMarkb
New rack fittedImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Sun Apr 19, 2020 3:00 pm
by NZMarkb
Bar & winch fitted
Didn't like the stainless badge so removed itImageImage

Sent from my SM-G950F using Tapatalk

Re: NZMarkb's Build

PostPosted: Mon Apr 27, 2020 2:48 am
by BrettBalmer
Coming along nicely Mark. Keep there pics coming. [emoji106]

Sent from my SM-N960F using Tapatalk

Re: NZMarkb's Build

PostPosted: Mon Apr 27, 2020 5:11 am
by NZMarkb
Cheers mate, just need this lockdown over so I can get out and use it :cry:

Re: NZMarkb's Build

PostPosted: Sun May 17, 2020 2:48 am
by BrettBalmer
I hear you. I've sent my 105 to a bloke that works from home. Gull wing fitted, all suspension bushes done and a whole lot of cosmetic stuff. Can't wait to use it too now.

Sent from my SM-N960F using Tapatalk

Re: NZMarkb's Build

PostPosted: Sun May 17, 2020 1:34 pm
by NZMarkb
Sounds great, post some photos when it’s done

Re: NZMarkb's Build

PostPosted: Sun Jul 05, 2020 5:48 am
by NZMarkb
Fitted a muffler delete pipe
Sounds way better :D :D